Production Info
Category: 5L Blow Molding Machine with view stripe, Blow Moulding Machine
Applicable materials: PE, PP
Usage: luggage barrel tank, hollow plates, tubes, boxes, balls
Production capacity: 60kg / h + 2kg / h
Yield: 5L gear oil bottle, 250g, 5000 pcs / day,(Output varies on different Factor, please consult our sales engineer for accurate output of your product)
Mold frame number: 2
Number of Die heads: 1
Screw diameter: main screw 65mm, view stripe screw 25mm,
The maximum open-distance: 450 (mm)
Clamping minimum distance: 200(mm)
Whether it contains thickness control: yes
Warranty Period: whole year warranty,all life service
Whether to provide custom processing: Yes
Brief Introduction
| 65-25U2X1.5F |
Example |
Oil bottle 4L, 210g |
| Twin station single cavity blow moulder up to 5L |
Output |
180pcs/hr 4300pcs/day 1.5 million/year |
General Features
The screw diameter is 65mm;
Single die head, double station and double layer(could be figure by double die head ,four die head);
Scissors toggle clamping system, high rigidity mold clamping, clamping force is larger than before,force under the clamping plate is uniform;
High accuracy linear guide rail, fast moving speed and stable production;
Thanks to the double pump & proportion flow valve, the power consumption can be decrease;
Configured with thickness control system;
Integration of various take-out concepts;
Modern, ergonomic and easy-to-use screen controls with Touchscreen and industrial PC networking of intelligent peripheral devices(both WIFI and 3G net work are valid);
can be provided with IML (in-mould-labeling);
The maximum blow volume is 5L,PE、PP、PS、PC、PVC can be used, suitable for production of 5L lubrication bottle、5L cleaning stuff bottle、toy and auto parts.
Technical Data
General Features
| Carriage horizontal shuttle stroke |
mm |
500 |
| Dry cycle |
sec |
4.3" |
| Clamp force |
kN |
78 |
| Pressure of Hydraulic System |
Mpa |
14 |
| Pressure of Pneumatic System |
Mpa |
0.6-0.8 |
| Pressure of Cooling System |
Mpa |
0.2-0.3 |
| Air consumption (estimated) |
M3 / hr |
5 |
| Minimum pressure for cooling water to machine |
Mpa |
0.2 |
| Power of pump motor for hydraulic movements |
kW |
7.5 |
| Power of servo pump motor(if needed) |
kW |
(5.5) |
| power of Die head heating |
kW |
5 |
| Power of knife |
kW |
2 |
| Total power installed (estimated, maximum) |
kW |
42.2(47.7) |
