Related Searches: Bottle Blow Molding Machine | Water Bottle Blowing Machine | Plate Conveyor for Bottle Moulding | Roller Conveyor for Bottle Moulding
Product List

90-65-40U+S2X4.15F 2L High Production Blow Molding Machine


1. In this high production blow molding machine, super harden guide column plus front linear guide rail is applied. Thus, it features small mechanical friction, strong wear resistance, stably fast moving speed.
2. Double proportional vale is applied to control oil speed and pressure in the oil channel. Besides, reversing valve is used for flow direction control, and reduction valve for brake.
3. Mould locking force is uniform due to special design for the mould to bear stress.
4. Made of ductile cast iron solid, the whole mould frame and moulds are firm enough to work for long time.


1. The screw diameter is 90 mm, 65 mm, or 40 mm.
2. This detergent bottle blow moulding equipment has four mould cavities and double stations. Special screws for material recycle are adopted.
3. Scissors toggle clamping system features high rigidity mold clamping. The clamping force is much larger than machine produced by other manufacturers.
4. With high accuracy linear guide rail, it features fast mould moving speed and stable production.
5. Power consumption is decreased due to the adoption of double proportional flow valve.
6. 90-65-40U+S2X4.15F 2L high production blow molding machine is configured with automatic lubrication system, thickness control system and in-mould labeling function.
7. Touch screen is designed according to ergonomics, which makes operation more user-friendly. Besides, the industrial PC networking supports WIFI or 3G for signal transmission.

Technical Data

1. General Features

Carriage Horizontal Shuttle Stroke mm 700
Dry Cycle sec 5"
Clamp Force kN 172
Pressure of Hydraulic System Mpa 14
Pressure 0f Pneumatic System Mpa 0.6-0.8
Pressure of Cooling System Mpa 0.2-0.3
Air Consumption (Estimated) m3 / hr 5
Minimum Pressure for Cooling Water to Machine Mpa 0.2
Power of Pump Motor for Hydraulic Movements kW 14
Power of Servo Pump Motor (if Needed) kW (5.5)
Power of Die Head Heating kW 13
Power of Knife kW 2
Total Power Installed (Estimated, Maximum) kW 110.3(115.8)

2. Extruders

Screw Diameter mm 90/65/40
Extruder Rotating Speed / 5-65/20~67/20~40
Power of Electric Motor kW 37/15/5.5
Power of Barrel Heating kW /17.512.5/3/3
Max. Throughput = PE kg/h 160/60/10
Max. Throughput = PP kg/h 110/40/7

3. Mould Dimensions

Maximum A mm 130
Maximum Length B mm 310
Minimum Depth C mm 220
Clamp Open Max. Daylight D mm 260
Open Stroke E mm 390
Max Weight of Mould kg 100

4. Production Possibilities

Cavities 4
Max center distance mm 140
Max. Container mm 130
Max. Container mm 220
Max. Container Depth mm 110
Container Capacity (Estimated) lt 2

5. Machine Dimensions

Maximum mm 4700/(2100)
Maximum Length mm 4170
Maximum mm 2700
Total Weight kg 9000

One year’s warranty period is offered to each high production blow molding machine. During this period, machine parts (excluding the fast wear parts) can be changed into new ones for free if they are broken. And we provide installation service to domestic clients.